show ipsec policy

Display Internet Protcol Security (IPsec) policy information.

Syntax

show ipsec policy all
show ipsec policy interface WORD<1-32>
show ipsec policy name WORD<1-32>

Command Parameters

all: Displays all of the IPsec policies on the switch.
interface WORD<1-32>: Displays a specific IPsec policy based on the policy name on the interface.
name WORD<1-32>: Displays the IPsec policy based on the name of the policy.

Default

None

Command Mode

User EXEC

Command Output

The show ipsec policy all and show ipsec policy name commands display the following information:


Output field	Description
PolicyName	Specifies the IPsec policy name.
LocalAddress	Specifies the local address. The default is 0::0.
RemoteAddress	Specifies the remote address. The default is 0::0.
Protocol	Specifies the protocol.
src-port	Specifies the source port.
dest-port	Specifies the destination port.
Action	Specifies the action as either: permit or drop.
Admin	Specifies whether the policy is enabled.

The show ipsec policy interface command displays the following information:


Output field	Description
POLICY NAME	Specifies the IPsec policy name.
InterfaceIndex	Specifies the interface.
Policy State	Specifies whether the policy is enabled.

9039033-00 Rev AA